Sensor Pump Foam - Simplehuman
Your Bag Is Empty
Rechargeable sensor pump 9 fl oz Complimentary Soap with Sensor Pump Purchase
|
Ends Nov. 6th
Complimentary Soap with Sensor Pump Purchase
*Offer Valid Until Nov. 6th
We use cookies and similar technologies on our website to enhance the website experience, analyze performance and traffic on our website and assist with our marketing efforts. Clicking “Accept” indicates that you agree to our use of these technologies. To learn more, please review our Privacy Policy.
Accept
Manage Preferences
Product Support
Foam Sensor Pump
Product Support
Foam Sensor Pump
Product SKUs:
ST1062, ST1063, ST1064, ST1065
TROUBLESHOOTING
Liquid is dispensing instead of foam.
- Clean the sensor using a microfiber cloth and rubbing alcohol.
- Move the unit to a different location away from any close objects.
- To reset, press and hold the power button down for 5 seconds; then press the power button for 2 seconds to turn on the unit.
After charging, the pump is not dispensing.
- Keep the pump away from heavy steam and back off several inches away from any steam.
- Release the soap cartridge from the sensor pump. Use your finger to cover up the air intake tube (under the pump between the two orange hooks). Make sure the pump is on and completely cover the sensor window, then press the power button 3 times quickly.(Note: this will make the pump run continuously until the sensor window is uncovered.)
Pump dispenses too little foam.
- To control the amount of soap desired, position your hand up close to the sensor for a little soap and farther away for more.
- Check if biggest diameter straw (blue in color) is installed.
- Add 1-2 tablespoon(s) of rubbing alcohol or water as some soaps can become too thick with time.
- Turn the unit on and re-prime the pump by completely covering the sensor window, then pressing the power button 3 times quickly. Note that this will make the pump run continuously until the sensor window is uncovered.
Pump is auto-dispensing.
- Wipe the sensor window clean. Rubbing alcohol and a microfiber cloth are recommended.
- Switch the unit off for 5 seconds, then switch the unit back on.
Soap is dispensing erratically.
Gently wipe any dried residue from the spout with a wet paper towel.
How long does it take to fully charge?
3-4 hours or until a solid white light is displayed.
What do the indicator lights mean?
A solid white light indicates the unit is fully charged and displays when the unit is powered on. A pulsing white light indicates the unit is charging. A solid red light indicates the unit low on charge.
Lid pops up.
The air vent cutout might be clogged. Gently wipe any soap residue from around the white seal under the lid.
Unit is not dispensing even if charged. Unit is not turning on.
Pump needs to be reset:
- Press and hold the power button for 5 seconds.
- Wipe the sensor lens clean. Rubbing alcohol and a microfiber cloth are recommended.
- Press the power button for 2 seconds to turn on the unit.
- Completely cover the sensor window and tap the power button quickly 3 times (within 2 seconds). Note that this will make the pump run continuously until the sensor window is uncovered.
INSTRUCTIONS
Instruction Sheet
Download the instruction sheet for your Instruction Sheet.
WARRANTY
To file a warranty claim, please click here.
CONTACT US
Tell Us More\ \ \ Send us a message
Text Us\ \ \ 424-360-2828 (8am - 5pm PST)
Chat With Us
Start chat (8am - 5pm PST)
- Choosing a selection results in a full page refresh.
- Opens in a new window.
www.simplehuman.com is blocked
This page has been blocked by an extension
- Try disabling your extensions.
ERR_BLOCKED_BY_CLIENT
Reload
This page has been blocked by an extension
www.simplehuman.com is blocked
This page has been blocked by an extension
- Try disabling your extensions.
ERR_BLOCKED_BY_CLIENT
Reload
This page has been blocked by an extension
www.simplehuman.com is blocked
This page has been blocked by an extension
- Try disabling your extensions.
ERR_BLOCKED_BY_CLIENT
Reload
This page has been blocked by an extension
www.simplehuman.com is blocked
This page has been blocked by an extension
- Try disabling your extensions.
ERR_BLOCKED_BY_CLIENT
Reload
This page has been blocked by an extension
www.simplehuman.com is blocked
This page has been blocked by an extension
- Try disabling your extensions.
ERR_BLOCKED_BY_CLIENT
Reload
This page has been blocked by an extension
Code Finder
Don't know your liner code? Not a problem! Locate your liner ID tag under every trash can lid.
${{amount}}
shop.app
shop.app is blocked
This page has been blocked by an extension
- Try disabling your extensions.
ERR_BLOCKED_BY_CLIENT
Reload
This page has been blocked by an extension